Basic Operation
18
Remove the back cover.
While pressing the “
”
part of the back cover in
direction A, slide the back
cover (2 mm or more) in
direction B to unlock and
remove it.
1
Attach the battery pack.
With the arrow mark facing up,
fi t the tab side of the battery
pack to the FOMA terminal
securely, and then push the
battery pack in direction B while pressing it against
direction A.
When you remove the battery pack
Engage your nail on the projection of the battery
pack, and lift it up.
3
Attach the back cover.
With the back cover stayed
open about 2 mm, match it
to the groove on the FOMA
terminal. Then while pushing
the back cover as a whole downward, slide it in the
direction of the arrow, and then install.
Confi rm there is no gap between the back cover
and the FOMA terminal.
4
Attaching UIM (FOMA Card)/ Battery Pack
Before Using
About UIM
The UIM is an IC card that holds your
information such as phone numbers.You
cannot use the FOMA terminal for
communications such as voice/videophone
calls, i-mode, or sending/receiving mail,
unless the UIM is inserted.
Ensure that you turn off, close, and take hold of the
FOMA terminal when you install or remove the UIM.
You cannot use the UIM (blue) on your FOMA
terminal. If you have that blue one, have it replaced at
a docomo Shop.
Insert the UIM.
With the golden IC surface
downward, push the UIM slowly
to the end while pressing surface.
Take care not to damage the
IC portion.
When you remove the UIM
Pull it out slowly while sliding.
2
Cut
Projection
Arrow mark
Approx. 2 mm
