22
This section explains how to set an access point name (APN) for packet communication. You can register
up to 10 access point names (APNs), which are managed with cid1 to cid10 (see page 24).
When using “mopera U” or “mopera”, you do not need to set the access point name (APN).
The explained here is an example when you use “XXX.abc” as the access point name (APN) and use the
FOMA USB Cable with Charge Function 01/02 (option). For the actual access point name (APN), contact
your Internet service provider or network administrator.
The setting here will be the access point number for dial-up network setting (see page 28).
1
Connect the FOMA USB Cable with Charge Function 01/02 to the FOMA
terminal.
2
Turn the power to the FOMA terminal on, then connect the FOMA USB
Cable with Charge Function 01/02 connected to the FOMA terminal to the
personal computer.
3
Start Hyper Terminal.
“
スタート
(Start)”
→
“
すべてのプログラム
(All programs)”
→
“
アクセサリ
(Accessories)”
→
“
通信
(Communications)”
→
Open “
ハイ
パーターミナル
(Hyper Terminal)”.
After starting Hyper Terminal, when the message “
『既定の
Telnet
』プログラムにしますか?
(Select the specified Telnet
program?)” is displayed, set as desired. Contact the maker of your personal computer and Microsoft Corporation for the setting
contents.
4
Enter any name in the “
名前
(Name)” field, then click “OK”.
Here, “Sample” is entered as an example.
Set an Access Point Name (APN)
For Windows XP
Continued to Next Pa
g
e
