manualshive.com logo in svg

doble SFRA, User Manual, Page: 83 / 126

Share
Download
doble SFRA User Manual Download Page 83

    A. Software Overview 

72A-2570-01    Rev. K    07/2011

A-5

Manually Install the USB Driver

It is crucial that you manually install a specific USB driver for your SFRA 
instrument. 

Do not rely on any pre-installed drivers that came with Windows. 

Where to Find the Driver

Made by Silicon Laboratories, the USB driver can be found in these locations:

•

On  the  SFRA  V5.2  CD.

•

On a Doble FTP site. Doble provides different FTP sites for Internet 
Explorer Version 6 and Internet Explorer Version 7 or 8:

•

IE  V6—

ftp://Dobleguest:[email protected]

. 

Navigate to the SiLab driver folder and download the driver to any 
location on your hard drive. 

•

IE  V7  or  8—

ftp://ftp.doble.com/dobleguest/SiLab/

. 

Download the driver to any location on your hard drive.

Remove Previously Installed USB Drivers

To avoid conflicts, remove all previously installed Silicon Laboratories 
CP210x VCP drivers before installing the new one. The following procedure 
is for Windows 7; the procedure may vary slightly for other versions of the 
Windows operating system. 

To remove previous versions of the USB driver:

1.

Open the 

Start Menu

 and select the 

Control Panel

.

2.

In the Control Panel window, select 

Programs

 and Features.

3.

In the Uninstall or Change a Program window, select and remove any 
earlier version of the 

Silicon Laboratories CP210x VCP 

driver that may be 

installed.

Install the Driver

To install the driver on your PC, double-click the 

CP210xVCPInstaller

 file and 

follow the installation prompts.

Summary of Contents for SFRA































































































































Reviews:

No comments