doble SFRA, User Manual, Page: 15 / 126

72A-2570-01 Rev. K 07/2011 xv
Preface
The Sweep Frequency Response Analyzer User Guide explains how to install,
configure, and operate Doble’s M5200, M5300, and M5400 Sweep Frequency
Response Analyzer instruments.
Who Should Read This Guide
This guide is intended for engineers and field testers who work with an
M5200, M5300, or M5400 Sweep Frequency Response Analyzer. It is
assumed that the reader is familiar with professional standards and safety
practices.
Document Conventions
Typefaces
This document uses special typefaces to indicate particular kinds of
information:
• Bold Arial type identifies software controls and text you must enter:
Example: Type in
1500 ms
.
• Monospaced type identifies text that is displayed in the user interface,
such as an error message or prompt:
Uploading test results
.
Notes and Warnings
This document uses icons to draw your attention to information of special
importance, as follows.
Notes
NOTE! Notes provide supplemental information that may apply to only
some circumstances.