manualshive.com logo in svg

doble SFRA, User Manual, Page: 82 / 126

Share
Download
doble SFRA User Manual Download Page 82

Sweep Frequency Response Analyzer (SFRA) User Guide

A-4

72A-2570-01    Rev. K    07/2011

8.

Run SFRA 5.2 by double-clicking the icon on the desktop or running the 
program from within the Start menu.   

A message window asks whether your instrument is an M5300 
(

Figure A.5

).

Figure A.5  Identifying an M5300

9.

Click 

Yes

 or 

No

 as appropriate.

The Select Default Template window appears (

Figure A.6

).

Figure A.6  Select Default Template Window

10.

Select the appropriate template and click 

Open

.

If you have installed SFRA 5.2 over an earlier version of SFRA, the word 

legacy

 is appended to the names of your existing templates.

Installation and initial setup of SFRA 5.2 is complete. 

NOTE: For SFRA 5.2 to work with USB communications, the correct driver 
must be installed. Go to 

“Manually Install the USB Driver” on page 5

 to 

ensure that the correct driver is installed.

Summary of Contents for SFRA































































































































Reviews:

No comments