doble SFRA, User Manual, Page: 39 / 126

3. Setting Up and Running a Test
72A-2570-01 Rev. K 07/2011 3-15
Step 4: Select and Run a Test
By running the shorted-lead test, you have already followed the complete
procedure for running a test. This section provides a testing procedure for a
transformer that has already been set up in SFRA and associated with a test
template.
Requirements for This Test
Complete these actions before you run a test:
1. Perform the shorted-lead test. Do not omit it. To run the test, go to “Step
1: Set Up and Run a Shorted-lead Test” on page 3-2 .
2. Set up the transformer in SFRA. To do this, go to “Entering a Transformer
into the SFRA Database” on page 5-5 .
3. Ground the transformer. Do not omit this procedure. If you have not
already done so, go to
“Step 2: Ground the Transformer” on page 3-12 .
4. Prepare the transformer for testing. If you have not already done so, go to
“Step 3: Prepare the Transformer for Testing” on page 3-14 .
Associate the Transformer with a Test Template
A transformer must be associated with a test template before it can be tested.
To do this:
1. In the main window of the SFRA software, open the
Edit
menu and select
Edit Apparatus
( Figure 3.24 ).
Figure 3.24 Edit Apparatus Option on Edit Menu
The Test Equipment Editor window opens ( Figure 3.25 on page 3-16 ).