DNIPRO M PM-160SP, Manual

Page: 17 / 36

PM-160SP
13
ENG
1 Power button 7 Auxiliary handle
2 Power button lock 8 Spindle lock button
3 Rotation speed governor 9 Backing pad
4 Mains cable 10 Polishing head
5 Brush-holder cover 11 Gear unit body
6 Vent holes 12 Motor body
4. SCOPE OF SUPPLY
1. Polisher
2. Auxiliary handle
3. Auxiliary handle screws
4. Key for auxiliary handle fixing
5. Disc - backing pad
6. Polishing head
7. Additional set of graphite brushes
8. Operating manual
9. Package
The manufacturer reserves the right to make minor changes to the scope of
supply that do not affect the machine operation.
5. TECHNICAL DATA
Parameter name PM-160SP
Mains voltage/frequency, V/Hz 230/50
Power 1600
Idle speed of rotation, rpm 600 - 3600
Maximum head diameter, mm 180
Spindle thread M14
IP Class IP20
Net/gross weight 4.2/4.4
Power control function
This system improves performance and makes electric tool operation more comfortable.
When you start to polish (i.e., load the machine), the disc speed is reduced. In order to
increase the machine efficiency the electronics uses backup capacity thereby preventing
the speed drop. Thus, the polisher resistance to loads is increased.
Starting current restriction (smooth start)
A smooth start system avoiding sudden speed up of the machine when turned on
is provided to increase the polisher service life and prevent its wear. A starting current