![background image](http://html1.mh-extra.com/html/dmx4all/dmx-relais-analog-interface-1/dmx-relais-analog-interface-1_user-manual_2514398006.webp)
DMX Relais/Analog Interface 1
6
Operation mode settings
The
DMX Relais/Analog Interface 1
has several operation modes (MODE), which
can be set per RDM or described as follows:
•
Turn on the device
•
Set switch 9 and 10 on OFF
•
Set switch 10 on ON
•
Adjust the operation mode via switch 1-8
•
Set switch 9 on ON
•
Set switch 10 on OFF
•
The LED lights up 4x to confirm the takeover
•
Adjust the DMX-address via switches 1-9
Switch 1 OFF:
Relay + Analog
Relay and analog output are controlled with separate DMX channels
Relay switches at DMX-VALUE > 127
Switch 1 ON:
Relay & Analog
Relay and analog output are controlled with common DMX channels
Relay switches at DMX-VALUE > 0
Switch 2 OFF:
Analog output 8Bit (256 Steps)
Switch 2 ON:
Analog output 10Bit (1024 Steps)
Switch 3 OFF:
Analog output 0-10V
Switch 3 ON:
Analog output 1-10V
Switch 8 OFF:
DMX-HOLD not active
Switch 8 ON:
DMX-HOLD active