![background image](http://html1.mh-extra.com/html/dmx4all/dmx-relais-analog-interface-1/dmx-relais-analog-interface-1_user-manual_2514398013.webp)
DMX Relais/Analog Interface 1
13
Factory Reset
Before running the Factory Reset, read all steps carefully.
To reset the
DMX Relais/Analog Interface 1
to delivery state, proceed as follows:
-
Turn off device (turn off power supply !)
-
Set DIP switch 1 up to 10 to ON
-
Turn on the device (turn on power supply)
-
The LED lights up 20x during ca. 3 seconds
While the LED lights up set DIP switch 10 to OFF
-
Now, the Factory Reset is executed
The LED lights up with error code 4
-
Turn off the device (turn off power supply !)
-
Now, the device can be used
If a Factory Reset is needed again, this procedure can be repeated at any
time.