DMQ QH5 U, User Manual

Page: 54 / 77

Chapter 3 40
Important
Keep in mind that setting the filter for more precision
means extra care particularly when measuring soft non-
ferrous materials or steel under 400HV.
Touch on
Measure
to open measuring mode options.
Figure 3.31: Measure mode options and nominal value
The modes in which measurements can be represented are:
Absolute
: The unit displays the real measured value.
Differential : The value displayed is a result of the value obtained from
calculating:
Differential = Real value – Nominal value
The nominal value is a reference value for the test piece.
Touch
on Nominal to set this value and touch to save. To
exit without making any changes touch .