X1 SERIES ELEVATOR CONTROLLER INSTALLATION & PROGRAMMING GUIDE | DIGITAL MONITORING PRODUCTS
1
X1 SERIES ELEVATOR CONTROLLER OVERVIEW
The X1 Series is a cloud-based access elevator controller that is fully programmed in Dealer Admin™ and
maintained in Virtual Keypad™� One X1 Elevator Controller can have up to 90 floors on a total of nine elevator
control modules�
This guide will cover mounting and wiring the elevator controller, configuring network options, applying
power, programming the elevator controller in Dealer Admin, and testing the elevator controller�
Elevator Controller Configurations
Elevator control for the X1 Series is offered in three different configurations depending on the application’s
needs�
Configuration
Part Number
Included Hardware
Description
X1 Elevator Controller
X1-ELEV
• Elevator Controller
• Elevator Control
Module
• Enclosure
This configuration includes all needed
parts for up to 10 available floors
in one enclosure� The X1-ELEV can
expand the number of floors through
the X1-ELEV-EXP and X1-ELEV-PCB
configurations�
X1 Elevator Controller
Expansion
X1-ELEV-EXP
• Elevator Control
Module
• Enclosure
This accessory to X1-ELEV Controller is
for expanding from 10 to 20 floors in a
second enclosure�
X1 Elevator Controller
PCB Only
X1-ELEV-PCB
• Elevator Control
Module
This accessory to the X1-ELEV-EXP is for
expanding from 20 to 30 floors in the
second enclosure, with up to 90 floors on
nine elevator control modules in total�
Elevator Controller Power
Powered by:
Maximum Current Draw:
Power Terminals
1�5 A
Elevator Controller Plug-In Terminals
Wiring terminals on an X1 Series Elevator Controller is done easily by using
the plug-in terminals�
1� Insert the wire into the slot�
2� Tighten the screw�
3� Snap the plug-in terminal onto the board�
Plug In
1
2
3
Insert
Tighten
