DMP Electronics Thinline Aqualite 7000 Series Installation And Programming Manual Download Page 17 | Manualshive

Page: 17 / 48

DMP Electronics Thinline Aqualite 7000 Series Installation And Programming Manual Download Page 17

7000 Series Installation and Programming Guide | Digital Monitoring Products, Inc.

13

WIRE THE ELECTRONIC LOCK

The 7073/A and 7173 keypads provide one internal programmable Form C single
pole, double throw (SPDT) relay for controlling door strikes or magnetic locks. Three
wires on the 5-wire harness, violet normally closed (N/C), gray common (COM), and
orange normally open (N/O), allow you to connect devices to the relay. The Form C
relay draws up to 15 mA of current and the contacts are rated for 1 Amp at 30 VDC
maximum.

WIRE THE 333 SUPPRESSOR

One Model 333 Suppressor is included with the 7073/A and 7173 keypads. If the
device being controlled by the relay is connected to the N/O and C wires, install the
suppressor on the N/O and C wires. If the device is connected to the N/C and C wires,
install the 333 on N/C and C wires. See Figure 7.

4

5

«
...
15
16
17
18
19
...
»

Summary of Contents for Thinline Aqualite 7000 Series

















































Reviews:

No comments