manualshive.com logo in svg

DMP Electronics Thinline Aqualite 7000 Series, Installation And Programming Manual, Page: 15 / 48

Share
Download
DMP Electronics Thinline Aqualite 7000 Series Installation And Programming Manual Download Page 15

  7000 Series Installation and Programming Guide  |  Digital Monitoring Products, Inc.

11

3

WIRE FOR ACCESS CONTROL

Internal Access Control Reader

The 7063/A, 7073/A, 7163, and 7173 keypads provide a built-in proximity card reader 
that is compatible with most standard 125 kHz proximity credentials. An external 
13.56 MHz proximity reader can be connected and will be compatible with 13.56 MHz 
proximity credentials. For a list of publicly supported card formats, see Public Card 
Formats.

Note

: Some proximity credentials are not compatible with DMP proximity 

keypads. Test the intended proximity credentials with the application before 
installation. DMP does not guarantee compatibility with credentials not 
purchased from DMP.

External Access Control Reader

To accept Wiegand data input from other external card readers, connect a 12 VDC 
external reader to a 7073/A or 7173 keypad. Connect the red and black power wires 
from the reader to the power wires from the panel. These connect in parallel with the 
keypad power wires. Connect the reader (Data 1) wire to the white wire on the 5–wire 
keypad cable. Connect the reader (Data 0) wire to the green/white wire on the 5–wire 
keypad cable. See Figure 6. 

Summary of Contents for Thinline Aqualite 7000 Series

















































Reviews:

No comments