LCD Keypad Installation Guide
11
Site COde
pOSitiOn: 1
Site Code Position
(7563/7563A, 7573/7573A only)
Enter the site code start position in the data string. Press any
Select key to enter a number between 0-255. Default is 1.
Site COde
Length:
8
Site Code Length
(7563/7563A, 7573/7573A only)
Enter the number of characters the site code contains. Press
any Select key to enter a number between 1-16. Default is 8.
USer COde
pOSitiOn: 9
User Code Position
(7563/7563A, 7573/7573A only)
Define the User Code start bit position. Press any Select key
to enter a number between 0-255. Default is 9.
USer COde
Length:
16
User Code Length
(7563/7563A, 7573/7573A only)
Define the number of User Code bits. Press the fourth Select
key to enter a custom number. Custom numbers can only be
a number between 16-40. Press COMMAND to save the entry.
The default is the DMP value of 16.
reqUire Site
COde: nO yeS
Require Site Code
(7563/7563A, 7573/7573A only)
Press the top row Select key under YES to use a site code and
press COMMAND to view the site code entry display. Default
is NO.
In addition to User Code verification, door access is only
granted when any one site code programmed at the SITE
CODES entry option matches the site code received in the
Wiegand string. You can program up to eight three-digit site
codes.
Note:
A card with a site code greater than three digits
cannot be used. Use only cards with three-digit site codes.
Site COdeS 1-4
> > > >
Site Codes 1-4
(7563/7563A, 7573/7573A only)
Enter site codes 1-4 (left to right separated by > sign). Press
the Select key below the > sign to add, delete, or change
the site code and press COMMAND. Site code range is 0-999.
Press the COMMAND key to display SITE CODES 5-8.