Digital
Monitoring
Products
CellCom‑LTE‑V Programming and Installation Guide
32
Status of Z‑Wave Devices
1. Access the user menu.
2. Press CMD until ZWAVE SETUP? displays.
3. Press any select area. The keypad displays ADD LIST REMOVE.
4. Select LIST to display DEVICE LIST and the first Z‑Wave device stored. Press CMD to advance through the list
of Z‑Wave devices.
5. Press any select area to display DEVICE RENAME STATUS.
6. Select STATUS to confirm radio communication with the Z‑Wave device.
7. The device name and OKAY displays when the device stored in the system communicates.
8. Press CMD to return to the device list and display the next device in the list.
9. If the device stored in the system does not communicate, the device name and FAILED displays. Press CMD to
display REMOVE FAILED DEVICE.
10. Choose YES to remove the failed device from the system memory. Choose NO to leave the device in the system
memory and to return to the device list.
11. When the device has been removed, the device name and REMOVED is displayed and the system no longer
tries to communicate with the Z‑Wave device.
Remove Z‑Wave Devices (REMOVE)
Each Z‑Wave device added to your system remains in your system unless it is removed. This option allows you to
remove Z‑Wave devices from your system.
1. Access the user menu.
2. Press CMD until ZWAVE SETUP? displays.
3. Press any select area. The keypad displays ADD LIST REMOVE.
4. Select REMOVE. PROCESSING may briefly display. When PRESS BUTTON ON DEVICE TO REMOVE displays,
press the program button on the Z‑Wave device. The device name and REMOVED is displayed to indicate the
Z‑Wave device has been removed.
Favorites (FAV)
Z‑Wave devices can be grouped together to create a favorite. This option allows you to program up to 20 favorites
in your system and then ADD, EDIT OR REMOVE up to 25 Z‑Wave devices in a favorite. When activated from the
FAVORITE user menu, a command is sent to its Z‑Wave Devices. A favorite can only be activated or turned on. A
separate favorite must be created to change the conditions set by the first favorite.
For example, a favorite called “Movie Night” could lock the exterior doors, close the garage door, adjust the
temperature, and dim the lights in the family room to the desired level. Another favorite called “Wakeup” could then
turn on the lights, adjust the temperature, unlock the exterior doors, and raise the garage doors.
Adding a Favorite
1. Access the user menu.
2. Press CMD until ZWAVE SETUP? displays.
3. Press any select area. The keypad displays ADD LIST REMOVE.
4. Press CMD again to display FAV XFER OPT. Select FAV and FAVORITE NUMBER: ‑ is displayed.
5. Enter a favorite number between 1 and 20 and press CMD. If the favorite number entered is unassigned,
*UNUSED* displays. If the favorite is already assigned, you may change the name or press the back arrow and
enter a new number.
6. Press any select area and a cursor displays. Enter a favorite name up to 16 characters. To remove a favorite,
press CMD without entering a name.
7. Press CMD to save the favorite. ADD EDIT REMOVE displays.
Add Devices to Favorites
1. Access the user menu.
2. Press CMD until ZWAVE SETUP? displays.
3. Press any select area. The keypad displays ADD LIST REMOVE.
4. Press CMD again to display FAV XFER OPT. Select FAV and FAVORITE NUMBER: ‑ is displayed.
5. Enter a favorite number between 1 and 20 and press CMD.
6. The favorite number and name displays. Press CMD and the favorite Name. ADD EDIT REMOVE displays.
7. Select ADD and the first Z‑Wave device stored in the system that has not already been added to this favorite is
displayed. Remaining devices can be viewed by pressing CMD.
8. Press any select area to assign the displayed device to the favorite. The device name and the current device
settings display. When added to a favorite, a Z‑Wave device can be programmed to respond to various ON/
OFF/LOCK/UNLOCK/HEAT/COOL commands based on your desired settings.
