CellCom‑LTE‑V Programming and Installation Guide
Digital
Monitoring
Products
23
TIME CHANGES
Choose YES to allow the communicator to request automatic time changes from the
SCS‑1R or SCS‑VR receiver. The receiver must be programmed to send and receive time
change updates from the host computer at least every 24 hours. The default is YES.
Choose NO to disable automatic time change requests.
When time zone is programmed YES, enter the number (0‑23) that indicates the
Greenwich Mean Time zone (GMT) where the communicator is located. The default is 6.
See Table 6 for GMT values.
GMT City/Time Zone
GMT
City/Time Zone
0
London, Monrovia, Lisbon
12
Fiji, Marshall Island, Wellington
1
Cape Verde Island, Azores
13
New Cadelonia
2
Mid‑Atlantic
14
Guam, Sydney
3
Buenos Aires, Georgetown
15
Tokyo, Seoul
4
Atlantic Time (Canada), Caracas
16
Hong Kong, Singapore
5
Eastern Time (US, Canada) Bogota
17
Bangkok, Hanoi
6
Central Time (US, Canada) Saskatchewan
18
Dhaka, Almaty
7
Mountain Time (US, Canada), Edmonton
19
Islamabad, Karachi
8
Pacific Time (US, Canada), Tijuana
20
Abu Dhabi, Kazan
9
Alaska
21
Moscow, Bagdad
10
Hawaii
22
Eastern Europe
11
Midway Island, Samoa
23
Rome, Paris, Berlin
KEYPAD INPUT
Select ECP to enable communication between the communicator and an Ademco/
Honeywell panel using the +Z4‑ terminals. Using the Ademco/Honeywell ECP Bus, the
communicator can add, delete, and change user codes as well as arm and disarm the
Ademco/Honeywell panel. The communicator will forward alarm messages from the
Ademco/Honeywell panel to the central station.
Select NONE to allow zone 4 to function as normally programmed. The default is NONE.
See Ademco/Honeywell ECP Connection for examples of panel wiring and necessary
Ademco/Honeywell panel programming.
TIME CHG NO
YES
HRS FROM GMT:
6
KYPD INPUT
NONE
ECP
Table 6: GMT Time Zones
