DMP Electronics 9000 Series, Installation And Programming Manual, Page: 27 / 48

Digital Monitoring Products, Inc | 9000 Series Installation and Programming Guide 23
Zone Test (9063 only)
This option allows the keypads to display the current electrical
status of the four protection zones. The status is shown as
OPEN , SHRT , or OKAY . The zone test displays on the other
keypads but is not operational.
Input Wiegand (9063 only)
This option tests the internal and external reader input from
proximity credentials. The display shows OKAY each time a
good proximity read is received.
Keypad Wireless Survey
Press the select key under KPD RF to start the RF
communication survey test. The keypad logo turns red
indicating communication has not been established with the
panel receiver. When successful communication has been
established, the keypad logo turns green.
RF Survey
Use RF SURVEY during the keypad association programming
by the control panel. The backlit logo turns green to indicate
that it has been associated by the panel.
Exiting the Installer Options
When done, press CMD once to return to the Installer Options screen. Press the select key
under STOP to exit the Installer Options function.
Z1 OPEN Z2 OPEN
Z3 OPEN Z4 OPEN
INPUT WIEGAND
KPD KPD
KPD
OPT DIAG RF STOP
RF SURVEY