background image

  9000 Series Installation and Programming Guide  |  Digital Monitoring Products, Inc.

22

Test the keypad to ensure alarm backlighting, individual shortcut keys, and any 

programmed zones work. To begin testing, access the Installer Options menu. Hold down 

the 

back arrow

 and 

CMD

 keys at the same time until 

SET BRIGHTNESS

 displays. Enter 

3577

 and press 

CMD

.

Keypad Diagnostics

Press the select key under 

KPD DIAG

. The keypad lights all 

display segments and illuminates the keyboard in red. The 

display backlighting then changes to green. The keypad 

alternates between these two states for approximately two 

minutes. Press 

CMD

 at any time to begin testing individual 

keys. 

Test Individual Keys

The display changes to 

PRESS KEY TO TEST

. This option tests 

each key on the keyboard to ensure it is operating properly. 

Press and hold each key for two seconds. The key number 

being held appears in the display. Verify the correct number 

displays before testing the next key.

KPD 

KPD  

KPD

OPT 

DIAG  

RF STOP

PRESS KEY TO
TEST

TEST THE KEYPAD

Summary of Contents for 9000 Series

















































Reviews: