DMP Electronics 9000 Series, Installation And Programming Manual, Page: 25 / 48

Digital Monitoring Products, Inc | 9000 Series Installation and Programming Guide 21
Additional Programming (9063 only)
Users can manually enter their user code into the keypad which then verifies the user code
and its authority with the panel. The 9063 activates the on-board Form C relay releasing a
door strike or magnetic lock. To provide added flexibility, the keypad allows connection of
an external Wiegand output compatible reader.
Proximity Credential Compatibility
DMP keypads with internal proximity readers are compatible with most standard 125 kHz
proximity credentials. An external 13.56 MHz proximity reader can be connected and will
be compatible with 13.56 MHz proximity credentials. For a list of publicly supported card
formats, see Public Card Formats.
Note
: Some proximity credentials are not compatible with DMP proximity keypads.
Test the intended proximity credentials with the application before installation. DMP
does not guarantee compatibility with credentials not purchased from DMP.
Program a Credential
1. Access the User Menu by pressing
CMD
until
MENU? NO YES
displays. Choose
YES , and present your proximity credential to the reader or manually enter your
user code at the keypad.
2. Press CMD until USER CODES? displays.
3. Press any select key. Choose ADD .
4. At ENTER CODE: - , present the credential to the reader. The keypad works by
reading the user code from the data string sent by the access control reader.