9
Vers. 20170705
Transport and storage
Use suitable lifting gear for transport.
Do not throw or expose the FlexxPump 1500 to strong shock loads.
Store the FlexxPump 1500 in a cool and dry place to avoid corrosion of the system’s individual parts.
Pay attention to the current safety- and accident prevention instructions during the transport. Wear
suitable protection equipment if necessary!
Installation instruction
The following conditions have to be satisfied during the installation of this FlexxPump 1500, thus it
can be assembled, with other parts, to a complete machine without affecting the safety and health
of humans:
The housing of the FlexxPump 1500 should not be exposed to direct sunlight and / or
radiant heat preventing the formation of condensation.
Electrical connection
•
Have the electric power supply connected only by a trained electrician!
•
Connection and wiring of the electric components should be done by an expert trained in this
field.
•
Check that the voltage requirements correspond to the existing power supply voltage!
Maintenance / repair
•
Disconnect the voltage feed, before starting with maintenance or repair.
•
Maintenance and repair work may only be done with the system shut down.
•
Check the surface temperature of 50 °C, due to danger of burning by radiant heat. Always
wear heat-resistance gloves! Protect the system from activation during maintenance and
repair work!