7
Vers. 20170705
General safety information
Basic information, which must be followed during service, operation and maintenance, are listed as follows.
It is absolutely essential that the end user reads the operator’s manual / user guide before installation and start up.
In addition to this, it must be permanently available at the site.
IMPORTANT
Please pay attention, to the safety instructions in this chapter as well as special security cautions that are mentioned
throughout the user guide.
This symbol warns of electrical voltage.
Safety instructions which, if not complied with, may endanger persons, are marked
Specifically with the general hazard symbol.
this heading is used if inaccurate compliance or non-compliance with the
Operating Instruction or specified work procedures etc. may result in damage.
Points out special information
Instructions attached directly to the machine, must be strictly followed and maintained in completely readable condition!
Qualification and training of the personnel
The operation, maintenance, service and installation personnel must have appropriate
qualifications for this work. Responsibility and supervision of the personnel must be clearly
defined by the end user / operator. If the personnel do not have the necessary knowledge, they
must be trained and instructed. The operator must ensure that the personnel have completely
understood the contents of the user information.
Non-observance of the safety information can be dangerous
Not observing the safety information can lead to danger for people, environment and machines.
Not observing the safety information can mean the loss of any or all damage claims. In special
cases, non-observance can, for example, lead to the following dangers:
•
Failure of important plant functions.
•
Failure of prescribed methods of maintenance and preventive maintenance.
•
Endangering people due to electrical, mechanical and chemical effects.
•
Endangering the environment due to leaks of dangerous materials.
Attention
Remark !