Touch
screen
DLoG ITC 7
User’s Manual
55
11.4.
Driver installation and calibration
11.4.1.
MS-DOS
The following description can be used for installing driver version 5.06.
11.4.1.1.
Installation
The directory
c:\hammouse
must be used in order for the driver to be able to locate the
calibration data.
Install the Hampshire touch screen driver
after
installing MS-DOS and verifying that the
installed system is fully functional.
Follow the instructions below to install the Hampshire touch screen driver under MS-
DOS:
1.
Create the directory
C:\HAMMOUSE
. This directory name must
not
be modified.
2.
Copy the DOS files for the touch screen into this directory. These DOS files can be
found in the directory
C:\Util
on the hard drive/Compact Flash of the DLoG ITC 7 or
on the driver CD-ROM.
3.
Enter the following command line in the batch file
Autoexec.bat
(for example, using <EDIT>):
Serial touch:
C:\HAMMOUSE\HMOUSE /B9600 /C4 /I11 /hY
PS/2 touch:
C:\HAMMOUSE\HMOUSE /p /T12 /hY
4.
Restart the computer.
Calling parameters:
You can also enter the following calling parameters:
/r Uninstall
the
driver
/? Help page
