Basic safety guidelines
DLoG ITC 7
User’s Manual
9
2.5.
Exchanging and extending modules
Replacement and extension by qualified personnel
Only personnel trained by DLoG or skilled personnel qualified in the electronic or
electrical engineering areas are authorized to carry out module extensions or module
replacements on the DLoG ITC 7.
No battery changes
Some functional groups of the DLoG ITC 7 motherboard are powered by a lithium ion
battery which is fixed to the motherboard.
This battery should not be replaced under any circumstances, as this requires
soldering! Should a battery replacement be necessary, the device must be sent to
DLoG. Changing the battery yourself will instantly void all present and future
guarantee and liability claims.
WARNING
Using an unsuitable battery type or incorrectly installing it may
cause the battery to explode.
Extending modules
When extending or replacing modules, only use components approved by DLoG for
use in the DLoG ITC 7. Each time before installing a component, please contact DLoG
to ensure that the desired module can be replaced or installed.
When extending modules, proceed with utmost caution.
Any damage caused while installing or replacing modules will instantly void all present
and future guarantee and liability claims.
Damage to the computer system
To avoid damage to the motherboard and/or other computer components, only install
modules in the designated slots.
Never physically touch the motherboard or any electrical components in a non-ESD-
protected area, as this may cause damage to the motherboard.
Before physically touching motherboards or electrical components, make sure that you
are working within an ESD-protected area.
