Operating system
48
User’s Manual
DLoG ITC 7
9.2.
Installing on the hard drive/CompactFlash
When a DLoG ITC 7 is started up for the first time without a pre-installed operating
system, the user needs to carry out a number of steps that will vary depending on the
system to be installed. Refer to the relevant operating system manual for specific
instructions.
Caution:
Property
damage
The installation and configuration of the operating system should
only be carried out by qualified personnel familiar with the system
environment.
9.2.1.
Operating systems supplied on CD-ROM
There are two ways to install operating systems which are supplied on CD-ROM:
•
Using an external CD- or DVD-ROM drive connected to a USB port. This drive can
be used to install, for example, MS Windows XP/SP1.
•
Initialize the hard drive/CompactFlash using a bootable floppy disk. Then copy the
operating system CD and driver CD contents onto the hard drive/Compact Flash
using the right network or CD/DVD-ROM-drivers. The operating system can then be
installed directly from the hard drive/CompactFlash.
The installation CD must include Service Pack 1 or higher if MS
Windows XP Embedded is to be installed via a USB-connected
CD/DVD-ROM. Service Pack 1 is included with all current
installation CDs from DLoG.