DLI LPC9 User Manual Download Page 45

Page: 45 / 81

CONTENTS

8.2.3.4

SNMPv1 settings

SNMPv1 trap targets have the following parameters:

• server address (hostname or IP address of management station),

• community string (the shared secret for authentication to server),

• enterprise OID (number),

• default generic trap type (number 0..6),

• default specific trap type (number 0..2147483647).

SNMP v1 accepts

snmp_enterprise_oid

snmp_generic_trap_type

and

snmp_specific_

←

trap_type

event properties to override the trap OID; they must be integers or string representations thereof.

It also accepts the

snmp_values

event property as described

above

8.2.3.5

SNMPv2c settings

SNMPv2c TRAP and INFORM targets have the following parameters:

• server address (hostname or IP address of management station),

• community string (the shared secret for authentication to server),

• trap OID (string)

SNMP v2c TRAPs and INFORMs accept an

snmp_trap_oid

event property to override the trap OID; it must be

a string. They also accept the

snmp_values

event property as described

above

8.2.3.6

SNMPv3 settings

SNMPv3 TRAP and INFORM targets have the following parameters:

• server address (hostname or IP address of management station),

• security name (username to authenticate as),

• security engine ID (leave empty for default),

• context name (leave empty for default),

• context engine ID (leave empty for default),

• authentication protocol ("MD5" and "SHA" are supported, leave empty "" for no authentication),

• privacy protocol ("DES" and "AES" are supported, leave empty "" for no encryption),

• authentication passphrase (should be at least 8 characters long, or empty if no authentication),

• privacy passphrase (should be at least 8 characters long, or empty if no encryption),

• trap OID (string)

You can either disable authentication and encryption, enable only authentication, or enable both. An encrypted, but
not authenticated configuration is invalid.

SNMP v3 TRAPs and INFORMs accept an

snmp_trap_oid

event property to override the trap OID; it must be

a string. They also accept the

snmp_values

event property as described

above

DLI LPC9 User’s Guide: 1.7.24.0

Summary of Contents for LPC9


















































































Search results

Summary of Contents for LPC9

Reviews:

Related manuals for LPC9

Brands by name

Popular brands

DLI LPC9, User Manual

Search results

Summary of Contents for LPC9

Reviews:

Related manuals for LPC9

Brands by name

Popular brands