DLI LPC9 User Manual Download Page 16 | Manualshive

Page: 16 / 81

background image

6 Setup page

15

When a time value is entered in the "All ON sequence delay" field, the power controller will pause for a period of time
before switching each outlet on in sequence. This delay helps prevent the power surges and blown circuit breakers
which can occur when multiple devices are switched on simultaneously. A delay of 60 seconds is suggested for
server applications. You may also enter a screen refresh delay in this section. If "Enable screen refresh" is checked,
and a delay value is entered, your browser should periodically update the status screen.

6.3

Power loss recovery modes

Power Loss Recovery Mode

When recovering after
power loss

Turn all Outlets off
Turn all Outlets on
Return to pre-powerloss state

Submit

Power loss recovery modes

The power loss recovery mode setting has three settings which take effect after a power failure:

1. You can turn all outlets off (all systems will be switched off until manually turned on later) by checking the first

box.

2. You can automatically turn all outlets on using the "All ON sequence delay" described above. Check the

second option to do this.

3. You can return to the same outlet settings that were used prior to the power loss. The "All ON sequence

delay" will also be used in this instance. Click the third option to return to pre-powerless state.

6.4

User-defined links

User Defined Links

#

URL

Description

1

http://www.digital-loggers.com/

Digital Loggers, Inc.

2

/src.tar.gz

Source code

Submit

User-defined links

You may link to other power controllers, your own web pages, or remote web sites by entering up to four URLs and
descriptions in the Setup page. For example, enter "Site Two Power Controller" in the description field with a URL
of "http://192.168.0.250/". These links appear on every page of the main web UI.

DLI LPC9 User’s Guide: 1.7.24.0

«
...
14
15
16
17
18
...
»

Summary of Contents for LPC9


















































































Reviews:

No comments

Related manuals for LPC9

Brand: S&C Pages: 26

Brand: S&C Pages: 37

Brand: S&C Pages: 28

Brand: LAUMAS Pages: 40

Brand: Hama Pages: 2

Brand: XtendLan Pages: 24

Brand: Metrix Pages: 12

Brand: Ruby Tech Pages: 2

Brand: Fairchild Pages: 20

Brand: ADC Pages: 75

Brand: SMC Networks Pages: 2

Master View CS-74A

Brand: ATEN Pages: 16

MISCOM7028GX Series

Brand: Maiwe Pages: 22

Brand: NeoPro Pages: 36

Brand: IPGARD Pages: 2

Brand: MLis Pages: 85

TM-1-8290/E/SVB

Brand: Eaton Pages: 2

Brand: Qlogic Pages: 412

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands