68
CONTENTS
The rest of meter configuration is centered around axes and plot lines which are drawn on them.
There are 4 axes:
x1
and
y1
are the usual ones;
x2
is at the top, and
y2
is at the right side.
Axis y1 properties
Minimum value:
0
Maximum value:
Soft minimum value:
Soft maximum value:
Major tic interval:
Minor tics per major tic:
Save
Configuration of an axis
Each axis has the following properties:
• minimum/maximum values: these specify the exact plotting value range;
• soft minimum/maximum values: these specify a range with limits which can be exceeded;
• major tic interval/minor tics per major tic: configure the axis tic behaviour;
The interaction between hard and soft limits is as follows:
• if no limit is specified, the plotting range is determined by the data to be plotted;
• if only a hard limit is specified, it's obeyed;
• if only a soft limit is specified, it's obeyed unless data exceed it, then data are obeyed;
• if both limits are specified, the soft limit (which should be less strict than the hard limit) is obeyed unless data
exceeds it, then data are obeyed unless they exceed the hard limit (which should be stricter than the soft
limit), then the hard limit is obeyed.
Several plot lines can be drawn on the same plot (they don't have to be proper lines but may have various shapes,
see below).
DLI LPC9 User’s Guide: 1.7.24.0
Summary of Contents for LPC9
Page 1: ...DLI LPC9 User s Guide 1 7 24 0 ...
Page 81: ......
