XS-110
Signal Adder Converter
XS-110 User Manual MAN-EN-DE-XS110-01.02_13 Page 11 of 24
All rights reserved to DLG Automacao Industrial
Operation
The output signal (0 / 4 ~ 20 mA or 0 ~ 10 Vdc) is proportional to the number of triggered
inputs. Figure 2 shows operation with 6 inputs.
Figure 2 – 4-20 mA and 0-10 V outputs on a XS-110 with six inputs
Table 1 show the expected output (current and voltage) based on the number of triggered
inputs for different XS-100 with 4, 6, 8, and 10 inputs.
Number of available inputs
Triggered input
4
6
8
10
mA
V
mA
V
mA
V
mA
V
None
4.0
0
4.0
0
4.0
0
4.0
0
1
st
8.0
2.5
6.7
1.66
6.0
1.25
5.6
1.0
2
nd
12.0
5.0
9.3
3.33
8.0
2.5
7.2
2.0
3
rd
16.0
7.5
12.0
5.0
10.0 3.75
8.8
3.0
4
th
20.0 10.0 14.7 6.66 12.0
5.0
10.4
4.0
5
th
17.3 8.33 14.0 6.25 12.0
5.0
6
th
20.0 10.0 16.0
7.5
13.6
6.0
7
th
18.0 8.75 15.0
7.0
8
th
20.0 10.0 16.8
8.0
9
th
18.4
9.0
10
th
20.0 10.0
Table 1 – Expected output signals.
The XS-110 has short-circuit protection of the sensor power supply. Whenever a short-
circuit is detected, the power supply is immediately turned off. The sensors are thus protected
from damage inflicted by the short-circuit.
