IM
–111
MODBUS UNIVERSAL INDICATOR
IM
–111 User manual
MAN-EN-DE-IM111-01.00_16
Page 13 of 44
All rights reserved to DLG Automação Industrial © 2011
– 2016
7.2 - KEYPAD FUNCTIONALITY
The configuration parameters are divided into five groups, called menus, which are in turn
divided into submenus.
7.2.1 - Menu navigation
To switch between menus, simultaneously press the
and
keys at any time.
This combination moves the user to the next menu, regardless of the previously selected submenu.
It is important to note that there is no key to return to the previous menu, so the user must press
the key combination again until the desired menu is found.
[If the user is unable to access the menus,
the frontal keypad may be locked; see section 7.2.4]
The menu sequence is depicted below.
Menu
Description
Input
Input type (process variable) settings. User can also set measurement unit for
temperature indication (Celsius or Fahrenheit degrees), engineering scale
minimum and maximum, decimal point for indication, linearization, among
others.
Submenus contained herein are:
.
,
.
,
.
,
.
,
.
,
.
,
.
,
.
,
.
,
,
.
,
.
,
Alarms
Alarm settings: set points, hysteresis, alarm triggering delay.
Submenus contained herein are:
.
,
.
,
.
,
.
,
.
,
.
,
.
,
.
,
.
,
.
Output
Retransmission settings: signal type, engineering scale minimum and maximum,
safety level and calibration (zero and span).
Submenus contained herein are:
.
,
.
,
.
,
.
,
.
,
.
Linearization
Input signal linearization settings.
Submenus contained herein are:
.
...
.
,
.
...
.
Modbus
communications
Modbus/RTU settings: address, baud rate, parity and response delay.
Submenus contained herein are:
.
,
.
,
.
,
.
