DKN technology XC-140, Manual

Page: 85 / 88

Ref Item Code Qty
43 Bearing #6004ZZ 2
44 bolt M8*52L 1
45 nylon nut M8*1.25*8T 2
46 flat washer D28*D8.5*3T 1
47 Waved washer D21xD16.2x0.3T 3
48 flat washer D13*D6.5*1.0T 1
49 upper protective cover 1
50 C ring S-15(1T) 2
51 spring D1.0*55L 1
52L left swing support tube 1
52R right swing support tube 1
53 foam D30x3Tx680L 2
54 foam D23x5Tx530L 2
55 mushroom end cap D1 1/4"*45L 2
56 spring D3*D19*67L 1
57 cross screw ST4.2x1.4x20L 4
58 cross screw ST4x1.41x20L 8
59 bolt M8*1.25*50L 1
60 flat washer D21*D8.5*1.5T 4
61 crank axle D20*116L 1
62 round magnet M02 1
63 cross screw ST3.5*1.27*15L 8
64 computer SM-2703-67 1
65 handpulse WP1007-12B 2
pulse cable 600L 2
66 flat washer D50*D10*1.0T 1
67 front computer bracket 380*150*50 1
68 rear computer bracket 340*150*50 1
69 front pedal axle D15.85x63.2L 2
70 idle fixing plate 1
71 Waved washer D27*D21*0.3T 1
72L left handlebar 1
72R right handlebar 1
73 flat washer D14xD6.5x0.8T 4
74 left protective cover 115x95x43 2
75 right protective cover 115x95x43 2
76 cross bolt M5x0.8x12L 1
77 knob D40*M6*12 4
78 adaptor 9V 1
79 plasctic cover D3*30L 1
80 round cross screw ST4x1.41x20L 2
81 insert plug D71.5*108L 1
82 nylon nut M6*1*6T 1
83 Allen bolt M8x1.25x30L 1
84 c ring S-16(1T) 2
85 bolt M6*65L 1
86 Allen nut M6*1*6T 1