DKC INFORPRO1000, User Manual

Page: 127 / 148

125
5.4 UPS On/Off operation
5.4.1 Turn on the UPS

Startup with utility power
After connecting to utility power, UPS will start up and begin self-test
automatically (by bypass output) and enter normal working state in 15
seconds. UPS working indicator (green light) is illuminated and bypass
indicator goes out, the user can turn on the load.

Startup with battery
When powered by the battery (without utility power), press power ON
button ( ) on the front panel for 3 seconds, the UPS should start
up the inverter for normal power supply output. UPS working indicator
(green light) is illuminated, inverter indicator is illuminated and fault
indicator flashes.
5.4.2 Turn off the UPS

Shutdown with utility power
Press Power OFF button ( ) on the front panel for 3 seconds, the
UPS should enter standby mode or bypass mode. The bypass indicator
(yellow light) is illuminated, and cut off the utility power input, the UPS is
turned off.

Shutdown with battery
Press Power OFF button ( ) on the front panel for 3 seconds, the
UPS is turned off.
Notes: