DKC INFORPRO1000, User Manual

Page: 132 / 148

130
9
CHA/CHARGE: Charging current
setting
1 ~ 3A is settable, default 1A
10
ECO/IECO: Energy-saving mode
selection
（ ON/OFF ） , default OFF.
If select “ON” during the battery mode
and load ≤ 3 % of nominal UPS
power, then the system accesses to
Sleep mode, reducing 90% of energy
consumption. When the load increases
> 3 % of nominal UPS power, the
system will automatically wake up
from sleep. (when start up the UPS
energy-saving mode and auto-
shutdown function at the same time,
the system default is energy-saving
mode in priority
11
NLS/INLS: Auto-shutdown function
selection
（
ON/OFF
）
, default OFF.
If select “ON”, verify that “NLS” (the
load rate of UPS shutdown) is in the
range of settings, then the system will
shut down after the configured time
(INLS). The configured load rate shall
meet actual requirements, modify if it
doesn’t meet.
Only in battery mode.
12
NLS/INLS: Setting of the load rate of
UPS auto-shutdown (3 % ~ 50 %),
default 3 %.
Only in battery mode.