136
supplier if there is no abnormal
situation.
13
BUS H
BUS high voltage
The inverter is abnormal, contact
the supplier.
14
CHARGE
Charging
overcurrent
The inverter is abnormal, contact
the supplier.
15
BATH
Battery
overvoltage
Check if the battery voltage is too
high.
16
EOD
Low-voltage
battery cut-off
Check if the batteries complete
discharging or batteries are
damaged. Contact the supplier if
there is no abnormal situation.
Table 14. Alarms
Perform testing in accordance with the following methods in case of non-
standard UPS operation. If the problem persists, please contact the
service center.
Problem
Solution
The utility power is normal, while
UPS cannot connect to it
- Check whether the power cord is
loose or not.
- Check whether the over-current
protector is out or not.
The utility power is normal, while
UPS cannot start normally. The
failure indicator is normally on, “
!
”
icon is normally on, and LCD
function display area displays OFF
- Check whether the battery wire is
connected or not.
- Confirm whether the battery is
damaged or not.
In utility mode, the buzzer beeps
continuously, “
” icon flashes, and
the UPS works in bypass mode after
a while; in inverter mode, the buzzer
beeps continuously, “
” icon
flashes, and the UPS is shut down
automatically after a while
Output overload; check whether the
condition of overload occurs in UPS
load display or not. Reduce the load.
Summary of Contents for INFORPRO1000
