v.200601
En.13
ENGLISH
OPERATING INSTRUCTIONS
20V CORDLESS INFLATOR
NOTE:
Before using the tool, read the instruction book carefully.
TO INSTALL COMPRESSOR UNIT TO THE POWER HEAD
1.
Depress release button (fig.16 R) and slight downward pressure on the
power unit will be sufficient install.
2. Depress release button to separate the compressor unit.
USING THE PRESSURE GAUGE
z
The blue scale pressure units are in Bar.
z
The black scale pressure units are in PSI.
TIRE CHECKS
z
Check tires on a monthly basis.
z
Incorrect
inflation shortens the life and performance of your tires, increasing
fuel consumption and jeopardising safety.
VEHICLE TIRE INFLATION
1. Remove the dust cap from the tire valve and store in a safe place.
2. Plug the air hose’s valve tip directly onto the tire’s air valve,then press the
lever down to lock it tightly
3. Check pressure gauge measurement in Bar or PSI.
4. If needed, add more air by pressing the trigger switch until the recommended
pressure is reached.
5. Flip up the lever and remove the air hose from the tire valve.
6. Replace the tire valve dust cap.
NOTE:
Only inflate tires to the manufacturer’s specifications. Vehicle tire
pressures can generally be found in the handbook, on the door pillar or on the
inside of the fuel filler cap.
INFLATABLE & LEISURE INFLATION
z
Select the appropriate adapter and screw into the valve connector.
z
The adapter for sports balls and the adaptor for air mattresses and rafts are
clipped onto the rear of the Tire inflator.
z
Insert
the connector adapter into the appropriate inlet of the inflatable.
NOTE:
Only inflate products to the manufacturer’s specifications.
CLEANING
z
Only
clean the inflator using a clean dry cloth.
z
Do not use cleaning products.
z
Ensure
the inflator is clear of any dust or other debris before connection.
