En.12
DK2 CHPW102 man.
ENGLISH
2. Immerse the other end of the intake hose in a water source, ideally a bucket
of water.
3.
When the product is connected with tap water, the water pipe joint (fig.13, W)
can be used to prevent the gun head from leaking. The water pipe joint
(fig.13, W) includes a switch function to start and stop the flow of water
(fig.13, S). Push the water pipe joint (fig.13, W) onto the inlet of the pressure
wash unit (fig.13, P). Pulling back on the connector’s (fig.13, C) outer sleeve
to release the water pipe joint (fig.13, W).
4.
You can also connect the soap bottle (fig.14, S) between the pressure wash
water inlet (fig.14, P) and the hose connector (fig.14, C). This will inject soap
from the bottle into the pressurized water stream.
CHOOSE THE SPRAY PATTERN
5. Hold the nozzle adapter with one hand and turn the multi-spray nozzle with
another hand to choose the spray pattern you want. There are three nozzles
with 0°, 25°, 40° patterns.
0
°
25
°
40
°
OPERATING INSTRUCTIONS
