10 |
OPV425 man.
waste.
•
Allow the engine to cool completely before storing in any enclosure. Never store a machine
that has gas in the tank, or a fuel container, near an open flame or spark such as a water
heater, space heater, clothes dryer, or furnace.
•
Never adjust or repair with the engine running. Shut down the engine, disconnect the spark
plug wire, keeping it away from the spark plug to prevent accidental starting, wait 5 minutes
before adjusting or repairing.
•
Never tamper with the engine’s governor setting. The governor controls the maximum safe
operation speed and protects the engine. Over-speeding the engine is dangerous and will
cause damage to the engine and to the other moving parts of the machine. If required, see
your authorized dealer for engine governor adjustments.
•
Keep combustible substances away from the engine while it is hot.
•
Never cover the engine while the muffler is still hot.
• DO NOT
operate the engine with the air cleaner or the carburetor air intake cover removed.
Removal of such parts could create a fire hazard.
DO NOT
use flammable solutions to clean
the air filter.
•
The muffler and engine become very hot and can cause a sever burn;
DO NOT
touch.
WARNING:
GENERAL SAFETY
Operating this Compactor safely is necessary to prevent or minimize the risk of death or
serious injury. Unsafe operation can create several hazards for you. Always take the following
precautions when operating.
•
Your machine is a powerful tool, not a plaything. Exercise extreme caution always. The
machine is designed to compact.
DO NOT
use it for any other purpose.
•
Know how to stop the Compactor quickly.
•
Never operate your unit on a slippery, wet, muddy, or icy surface. Exercise caution to avoid
slipping or falling.
•
Never use the machine without ensuring that all guards and shields are in place.
•
Never, under any conditions, remove, bend, cut, fit, weld, or otherwise alter standard parts
on the Compactor. This includes all shields and guards. Modifications to your machine could
cause personal injuries and property damage and will void your warranty.
•
If the machine starts to make an unusual noise or vibrate, shut down the engine, disconnect
the spark plug wire, keeping it away from the spark plug to prevent accidental starting, wait
5 minutes for the engine to cool down, then inspect for damage. Vibration is generally a
warning of trouble. Check for any broken or missing expendable items such as nuts, bolts,
pins, springs, wiring and switch components, fittings, throttles and belts. Also check engine
mounting bolts.
•
Never tamper with safety devices. Check their proper operation regularly.
•
Before performing any maintenance or inspection procedure, shut down the engine,
SAFETY
SAFE PRACTICES & GENERAL INFORMATION
ENGLISH
Summary of Contents for OPV425
