Configuring your Midi Fighter Twister
There are two different types of settings for the Midi Fighter Twister, global settings and
encoder settings. Global settings are not related to any particular encoder, while the encoder
settings are unique for each of the 16 encoders in each of the 4 virtual banks.
The global settings are found under the “Global Settings” tab in the left hand pane of the
utility, while the encoder settings for the currently selected encoder are displayed in the
“Encoder Settings” tab.
Any edits you make must be saved to the device by clicking the large blue ‘Send To Midi
Fighter’ button.
Editing Encoder Settings
The Encoder Settings can be found under the “Encoder Settings” tab in the left hand pane of
the utility and are unique to each encoder in each bank.
To select an encoder for editing first select its bank by clicking one of the bank buttons, and
then select the encoder by clicking on it, the circular blue cursor indicates the currently
selected encoder.
Editing Encoder Color Settings
Each encoder has two different color settings types, On Color (switch is pressed) and Off
Color (switch is released). The color palette at the top right of the window is used to set the
color of the currently selected encoder, and color setting type. To change which color setting
type is being edited use the buttons at the bottom right of the window.
Editing Multiple Encoders
It is possible to set certain settings for multiple encoders at the same time, this is called
“Multiple Edit” mode. To access this mode click the ‘Multiple’ button in the lower right hand
side of the utility. You can now select multiple encoders (in the same bank only) and modify
the available settings in the “Multiple Edit” tab on the left hand pane of the utility.
To save any edits made in Multiple Edit mode you must press the ‘Send to Midi Fighter’
button, to cancel without applying any changes just click ‘Cancel’ and it will discard the
changes and return to single edit mode.
!
11