Indicator Brightness 65 - 95
Allows the user to control the brightness of a RGB LEDs. Very useful to give or take
emphasis from a parameter. I.e. showing a parameter in a off state while color is still
visible or VU meters.
RGB Rainbow | Value 127
Forces the LED to display a rainbow animation.
To set the animation state of a given encoder send a CC or Note On message of the same
number, but on channel 6. If you’d like to send an animation to the RGB LED do so on
channel 3.
I.e. To set the animation state of the first encoder to Gate 1/4 send a Ch6 CC 0 of
value 5.
It is important to note that the MIDI color setting and MIDI animation setting can be used in
conjunction.
I.e. To set the first encoder switch to yellow flashing at a rate of 1/2 first send the
color information with a Ch2 CC0 of value 64, then the animation setting with a
Ch3 CC0 of value 4.
If the encoder switch MIDI channel or number settings are changed from default the color
and animation controls will change, i.e., if you change Encoder 1 in Bank 1 from channel 1
number 0 to channel 7 number 8 it will send MIDI on channel 7 number 8 and expect MIDI
out on the same number and channel.
Be aware that if you change from the defaults it could conflict with other MIDI sent by the
Twister. Check the Appendix for a full listing of all the default MIDI messages for the Twister.
!
6
