Fog machine H-2VSD
6 / 19
2.
Connection
2.1.1.
Electrical Connection
Connect the device to the mains using the supplied power cable! The
protective earth must always be connected!
Cable (EU)
Cable (US)
Pin
International
Brown
Black
Live
L
Blue
White
Neutral
N
Green/ Yellow
Green
Earth
2.1.2.
DMX connection
Make sure you always use shielded cables. 3pin or 5pin XLR cables are
suitable for this.
2.1.3.
DMX connection with terminator
For installations where the DMX signal has to bridge a large distance or where
the device is to be operated in an environment with increased
electromagnetic radiation, such as a discotheque, we recommend using a
DMX terminator. This prevents the digital control signal from being corrupted
by electrical noise. The DMX terminator is simply an XLR connector with a
120
Ω
resistor between pins 2 and 3, which is then plugged into the XLR output
jack of the last fixture in the chain. Please see the drawings below.
