Fog machine H-2VSD
2 / 19
1.
Safety Instructions
•
This device is only for use in
•
closed rooms (not outdoors).
•
The warranty claim expires if the device is modified by the user.
•
The device may only be repaired by trained specialists.
•
Only use fuses of the same type and only original parts as spare parts.
•
To prevent fire and electric shock, protect the device from rain and
moisture..
1.1.
Hinweise für den sicheren und einwandfreien Gebrauch
Beware of heat and extreme temperatures!
Do not place the device in a location subject to extreme temperatures. Only
operate the device in an ambient temperature between 0°C (32°F) - 40°C
(104°F). Do not expose the device to direct sunlight or heat sources.
Protect the device from moisture, water and dust!
When setting up the device, avoid locations with high humidity or
excessive dust. Do not place liquids on or near the system.
Always place the device on solid ground!
Place the device on a solid surface to avoid vibrations.
Do not use chemical agents for cleaning!
Use a clean, dry cloth to remove dust. Metal parts can be cleaned with a
slightly damp cloth. Before cleaning the device, always pull out the mains
plug!
If the device does not work properly!
If problems arise, unplug the power cord. The user should not attempt to
service the device on their own. All repairs and service must be performed by
a qualified technician.
Be careful with the power cord!
Never pull the mains cable to disconnect the device from the power supply,
but hold the plug housing in your hand. If you do not use the device for a long
period of time, pull out the mains plug
CAUTION!
The warranty claim expires in the event of damage caused by non-
observance of the instructions. The manufacturer and importer assumes no
liability whatsoever for consequential damage. Only qualified specialists may
establish the correct electrical connection. All electrical and mechanical
connections must be installed in accordance with European safety standards
