DJ-Tech Kontrol One, User Manual

Page: 3 / 16

ESP
AÑOL
IT
ALIANO
NEDERLANDS
ENGLISH
FRA
NÇAIS
DEUTS
CH
y
The KONTROL ONE is USB MIDI and provides simple plug & play features working with Windows/M a c.
y
Jog wheel and control technology from the turntables.
y
KONTROL ONE's control section via USB MIDI IN/OUT.
y
A high resolution pulse sensor jog wheel
y
Pitch bending, scratching and select song.
y
The resistance value of the fader movement is AD converted
y
The DATA SEND (LED)indicated the DATA is sent/received.
y
The power source is selectable from USB bus-power and the exclusive power adaptor.
1. POWER CONNECTOR
– Plug in power adapter here.
2. POWER SWITCH (Adaptor / OFF/ USB power)
– Set the switch to AC
ADAPTOR when using the exclusive AC adaptor, set to USB BUS
POWER when using power provided from the computer via USB.
3. USB PORT INPUT
– Used to connect a computer.
1. Install the software normally.
2. Connect the KONTROL ONE to computer normally.
3. Open
the software.
4. Start up the software to perform settings with the KONTROL ONE.
Note:
The software may not recognize the KONTROL ONE if it is connected to the computer after the
software has started.
5. Operations after the system recovering from power saving mode is not guaranteed.
Note:
Power save setting is required to be set OFF.
6. Many DJ software products have a MIDI LEARN function. The KONTROL ONE can control all software
that has this function.
This function is used to KONTROL ONE as controls for parameters of the software.
Note:
The MIDI LEARN setting for each software is different; please refer to each software's manual
for further instructions.
7. The MIDI data created with functions can be manually set with the software, if the software does not
support the MIDI LEARN function. Please refer to the software's manual for further instructions.
8. Hold the REWIND and PLAYBYNC button, then power on; KONTROL ONE will automatically calibrate
touch pad sensitivity and show the level of sensitivity with 4 LED rings on the top. Press DOWNBEAT
button to finish calibration.
POWER SUPPLY:
DC 6V
DIMENSION:
160(W)
×
289(D)
×
107.5(H) mm
WEIGHT:
1.45 kg
MAIN FEATURES
OPERATIONS
SPECIFICATION
CONNECTION
1 2 3
2