FloTech FT555 Automatic Truck Overfill System Tester
FT555 Truck Tester
10784PA Rev G
Page 21
The screens ABOVE show the optic/5-wire pass condition when
connected to sensors. A black square will be shown for each dry
working sensor. A dash under the number indicates a wet or
missing sensor.
The screens BELOW show the optic/5-wire pass condition when
connected to an onboard monitor. When connected to an onboard
monitor, optic/5-wire pass condition will show dashes for sensor
status. Onboard monitors do not have a diagnostic connection to
the rack monitor. They do not pass the number of good sensors
through to the rack monitor.
Optic Test
Test PASSED
Compartment
1 2 3 4 5 6
Status █ █ █ █ █
█
5-Wire Test
Test PASSED
Compartment
1 2 3 4 5 6
Status █ █ █ █ █
█
Optic Mode
Test PASSED
Compartment
1 2 3 4 5 6
Status
_ _ _ _ _
5-Wire Mode
Test PASSED
Compartment
1 2 3 4 5 6
Status
_ _ _ _ _
