FloTech FT555 Automatic Truck Overfill System Tester
FT555 Truck Tester
10784PA Rev G
Page 15
Ground Bolt
If you selected Ground Bolt, the screen below will be
shown. Press and release the GO button to Enable or
Disable the Auto Test function. Press TEST SELECT to
move to the Automatic Test screen. See Performing
Automatic Test Function on page 18
Auto Test Truck ID Module
Press and release the GO button to ENABLE or DISABLE the
Truck ID Module test during the automatic testing. Press and
release the TEST SELECT button to exit the SETUP mode and
return you to the “PRESS KEY/ TEST SELECT” screen.
AutoTest GroundBolt
Enable GroundBolt
GO = Change
TEST SELECT = Next
AutoTest TruckIDMod
Enable Truck IDMod
GO = Change
TEST SELECT = Next
