dixell EMERSON iCHiLL IC70CX, Operating Instruction

Page: 8 / 23

IC70CX Pag. 8 of 23
The type of the probes can be selected by C05 parameter:
 C05=PTC PTC probes are used
 C05=NTC NTC probes are used
The unit of measure of the temperature can be:

C06=°C temperatures are showed in °C
 C06=°F temperatures are showed in °F
For °C visualization it is possible to choose if the temperature has to be showed with decimal point or not:
 C07=DE temperatures are showed with decimal point
 C07=°F temperatures are showed without decimal point
10.1 Compressor
The compressor is used to maintain the set point temperature (S01 parameter).
It is possible to set a minimum OFF time (parameter C02) to avoid consecutive short cycles of the compressor.
If the regulation probe is faulty, the compressor will run with ON/OFF cycles defined by C03 and C04 parameters.
10.2 Heaters
Heaters can be used to integrate the compressor to produce hot water; to the compressor contribution is possible to add
electrical heaters contribution if the boiler temperature falls below a determined value set by parameter.