IC70CX
Pag. 7 of 23
6.3
How to move a parameter from the hidden menu (Pr2) to the first level (Pr1) and viceversa
Each parameter present in the HIDDEN MENU can be removed or moved into “THE FIRST LEVEL” (user level) by pressing
“SET +
”.
In HIDDEN MENU when a parameter is present in First Level the decimal point is on.
7.
How to lock the keyboard
7.1
Lock the keyboard
1.
Keep pressed
+
(together) keys for more than 3 seconds.
2.
“POF” message will be displayed and the keyboard will be locked. At this point it will be possible only to see the set
point or the Max o Min stored temperature.
3.
If a key is pressed more than 3 seconds, “POF” message will be displayed.
7.2
Unlock the keyboard
Keep pressed
+
(together) keys for more than 3 seconds, till the “Pon” message will be displayed.
8.
Maximum and minimum temperature memorization
8.1
How to see minimum temperature
1.
Press and release the
key.
2.
“Lo” message will be displayed followed by the minimum temperature recorded.
3.
By pressing the
key again or by waiting 5 seconds the normal visualization will be restored.
8.2
How to see the max temperature
1.
Press and release the
key.
2.
The “Hi” message will be displayed followed by the maximum temperature recorded.
3.
By pressing the
key again or by waiting 5 seconds the normal display will be restored.
8.3
How to reset maximum and minimum recorded temperature
1.
Hold press the SET key for more than 3 seconds, while the max or min temperature is displayed (rSt message will be
displayed)
2.
To confirm the operation the “rSt” message starts blinking and the normal temperature will be displayed.
9.
Set point visualization and modification
9.1
HOW TO READ THE SETPOINT
Push and immediately release “SET” key: the display will show the Set point value.
Push and immediately release “SET” key or wait 5 seconds to display the normal visualization.
9.2
HOW TO CHANGE THE SETPOINT
1.
Push the “SET” key for more than 2 seconds to change the Set point value;
2.
The value of the set point will be displayed and the “°C” or “°F” led starts blinking;
3.
To change the Set value push the
or
keys within 10 seconds
4.
To memorise the new set point value push “SET” key again or wait 10 seconds.
10.
How to switch on or switch off the instrument
By pressing
key it is possible to switch off (if previously was ON) or switch on (if previously was ON) the instrument.
After a power on is possible to delay the loads regulation setting C01 parameter.
Summary of Contents for EMERSON iCHiLL IC70CX
Page 1: ...IC70CX doc rel 1 1...
