30 DiViS
w w w .
DiViS
D V R . c o m
:
It shows the status of
display/record of cameras. The solid
lights on the middle tab row indicate
that images are coming from the camera by the number written on the top row. The blinking lights, if
any, on the middle tab row indicate that the camera are to be enabled in the DVR Settings, but image
is not coming for any of reason. The solid lights on the bottom tab row tell that the image from the
camera is being recorded.
: This displays the status of the 4 digital outputs. A pressed tab indicates that
particular relay is active; a depressed tab indicates that the relay is inactive.
: When network connection is made this image lids up. Move cursor over the image and IP
address of net client will be displayed.
: Indicates backup execution.
: The numbers and bars on the bottom indicate the total
number of volumes and the number of volumes being used.
: Display current software version.
- Change of the first two digits indicates major change in software, next two digits indicates minor
changes, and the last digit letter shows the type of board installed.
: Shortcuts for Search, Setting, Smart Search program.
: Exit the Main program.
: Click “Open” tap makes the cover for P/T/Z and image control, opened.
: Pressing this will pop up the login dialog – requires a valid username and password.
: Click "CAMERA" to use the CAMERA CONTROL options. Click "IMAGE"
to use the IMAGE CONTROL options for tuning the image color.
