19 DiViS
w w w .
DiViS
D V R . c o m
5-4. Camera
5-4-1. General
:
If selected, the
settings selected in
“General”, “Schedule”, “Color &
Motion” will be applied to all the
cameras.
If you would like to customize each
camera uniquely, select a camera
from the buttons on the left of the
menu (1-16) FIRST, then choose the
following options
•
Enable Camera:
Enable or disable camera. (Ch1 camera is always enabled.)
• Basic setting
- Camera name:
Enter name of the camera. (Name will be displayed in Main screen.)
-
Resolution:
Choose the desired resolution for the camera. (Note: the higher the resolution
size of the recording will lead to a slower frame rate.)
•
Adjust camera frame rate
- Maximum averaged frame rate:
Sets the recorded frame rate to the highest possible
available for installed Capture board.
- Select frame rate by camera:
Allows manual setting of the frame rate.
•
Security
-
Hide camera (Display):
The camera will not display its images on the monitor.
-
Remove from CCTV display:
the selected camera will not be displayed on the CCTV during
the auto-switch rotation. (For LIVCAP boards, this option may not take effect if “TV-out auto
switching interval” is set to “Normal”).
- Remove from network display:
Blocks from being displayed to remote connections
•
Compress format & rate:
Change compression rate. (Moving bar to the left makes image file size
smaller, but at the same time quality of image gets lower.)
•
Transmission format & rate:
Adjust compression rate for transmitting data to remote client.
