Digital Video Recorder User Manual
34
Fig 4.24 Alarm Configuration - Schedule Fig 4.25 Alarm Configuration - Video Loss
4.5.4 Other Alarm
Step 1:
Enter into system configuration
other alarm. Refer to Fig 4.26.
Disk full:
User can choose the capacity of the disk storage and select the related alarm. If the disk is full, the system will
alarm according to the setup.
IP conflict:
If there is an IP address conflict within the same network, the device will alarm after user selects buzzer and
the channel to alarm out.
Disconnect:
If there’s a disconnection, the device will alarm after the user selects buzzer and the channel to alarm out.
Disk Warning:
If the disk reduces, the system will send email to the designated mailbox or alarm to notify the reducing
information after the user has selected the corresponding function.
Step 2:
The setup steps of Buzzer, Email, and Alarm Out are similar with alarm handling. User can refer to “4.5.1 Sensor
alarm handling” for more details.
Step 3:
Select a hard disk in the pull down list box. When the disk capacity is lower than that value, there will appear some
text information on the lower right of the live image.
Step 4:
Click “default” button to set to default setting. Click “apply” button to save the setting and click “exit” button to exit
current interface.
