Digital Video Recorder User Manual
11
Item
Name
Function
14
BACKUP Button
To enter backup mode
15
PTZ Control Button
To control PTZ camera:
Move camera/ZOOM/FOCUS/IRIS/SPEED control
Operation processes with remote controller to control multi-DVR
The device ID of the DVR is 0. When using remote controller to control a single DVR, it’s not necessary to reset the device
ID, user can do operation directly; when controlling multiple DVRs with a remote controller, please refer to the steps below:
Step 1:
Activate remote controller to control DVR: enable DVR: turn the IR sensor of the remote controller to the IR
receiver that’s on the front panel, press the number key 8 twice, then input device ID (Range from: 0-65535; the default
device ID is 0) with other digital number: 0-9, after that, press ENTER button to confirm.
Step 2:
User can check the device ID by entering into System configuration
Basic configuration
device ID. User can
also set other DVRs with the same device ID. For convenience, we don’t recommend user to set the device ID too long.
Step 3:
Cancel controller to control DVR: turn the IR sensor of the remote controller to the IR receiver that’s on the front
panel, press the number key 8 twice, then input the device ID that needs to be cancelled from controlling, press ENTER
button to confirm. After that, the DVR will not be controlled by remote controller.
2.5 Control with Mouse
2.5.1 Connect Mouse
It supports USB mouse through the ports on the rear panel.
Notice: If mouse is not detected or doesn't work, check the steps below:
1. Make sure the mouse plugs into the USB mouse port not the USB port.
2. Change to a different mouse to try.
