Divis CHD12004H User Manual Download Page 2

Page: 2 / 85

Digital Video Recorder User Manual

CAUTION



Please read this user manual carefully to ensure that you can use the device correctly and safely.



We do not warrant all the content is correct. The contents of this manual are subject to change without notice.



This device should be operated only from the type of power source indicated on the marking label. The voltage

of the power must be verified before using. Kindly remove the cables from the power source if the device is not to
be used for a long period of time.



Do not install this device near any heat sources such as radiators, heat registers, stoves or other devices that

produce heat.



Do not install this device near water. Clean only with a dry cloth.



Do not block any ventilation openings and ensure well ventilation around the machine.



Do not power off the DVR when the device is in function. The correct procedure to shut down DVR is to stop

recording first, then use “shut down” button from the menu, and finally switch off the main power.



This equipment is for indoor use only. Do not expose the machine to rain or moist environment. In case any

solid or liquid gets inside the machine’s case, please cut off the power supply immediately and get it checked by a
qualified technician.



Refer all servicing to qualified service personnel. Do not repair any parts by yourself without technical aid or

approval.



This manual is suitable for 4 and 8-channel digital video recorders. All examples and pictures used in the

manual are from 8-channel DVR.

Summary of Contents for CHD12004H





















































































Search results

Summary of Contents for CHD12004H

Reviews:

Related manuals for CHD12004H

Brands by name

Popular brands

Divis CHD12004H, User Manual

Search results

Summary of Contents for CHD12004H

Reviews:

Related manuals for CHD12004H

Brands by name

Popular brands